Corpus Christi Window Replacement provides professional french doors in Corpus Christi, TX for residential and commercial properties across the Coastal Bend. A pair of French doors has no jamb in the middle. Two leaves meet in open air, held together by an astragal and whatever the hardware does at the top and bottom, and that centre joint is the entire structural argument for how the door is specified on this coast.
The astragal is the vertical member fixed to the inactive leaf that the active leaf closes against. On a serious door it is not a decorative strip. It is a reinforced section with shoot bolts driven top and bottom into the head and the threshold, so that when the inactive leaf is locked it behaves as a fixed jamb rather than as a second moving panel.
That is what the tested pressure depends on. A door with surface-mounted flush bolts dropping into a shallow hole in the threshold will not hold what a door with a reinforced astragal and deep engaged shoot bolts will hold. Two doors that look identical from six feet away can be a full performance grade apart, and the difference is inside the astragal.
Swing direction is the decision people find counterintuitive. An outswing door seals better under positive wind pressure, because the load pushes the leaves harder into their stops and their weatherstripping rather than trying to blow them inward off the latch. On an exposed elevation facing the water, outswing is usually the right specification even though inswing is the more familiar look.
The counterargument is real and we raise it: an outswing leaf takes weather on its hinges, needs non-removable hinge pins for security, and swings into whatever is outside. On a narrow porch or a walkway, inswing wins on practicality and we specify it with a better threshold and accept the trade.
Threshold detailing is where French doors leak. Two leaves and an astragal produce a junction at the sill that is genuinely difficult to seal, and it is the point where three sealing planes meet. A sloped pan under the whole unit with end dams, an adjustable threshold cap, and a corner pad at the astragal are the details that make the difference between a dry door and an annual complaint.
Glass follows the same logic as everywhere else on this coast. A French door is mostly glass at head height, it is a hazardous location so the lite is safety glazed regardless, and if it faces the water it is a candidate for laminated construction so the opening stays closed after an impact rather than becoming an entry for pressure.
If what you actually want is a wide opening to a patio and the swing is not important to you, a sliding door will reach a higher tested pressure for less money and will not take up floor space when open. We say this to roughly half the people who call about French doors, and about half of those change their minds once they see the numbers side by side.
Our licensed and insured team brings the right materials and equipment to every job — positive and negative design pressure ratings per opening, AAMA/WDMA/CSA 101/I.S.2/A440 performance grade, tested size tables published in product evaluation reports, large-missile classification under ASTM E1996, rated structural mullions with published load tables, fully tempered and heat-strengthened lites sized to the load — and backs the work with a written workmanship warranty. We serve Corpus Christi and nearby communities including Portland, Kingsville, Robstown, Rockport.
What We Handle
Everything our french doors in Corpus Christi covers
One crew, one point of contact, and the full range of french doors work in Corpus Christi, TX. If it is on this list we do it in house rather than handing it to a subcontractor:
- french doors Corpus Christi
- french patio doors Texas
- hinged patio doors Corpus Christi
- french door astragal
- multipoint lock french doors
- inswing vs outswing french doors
- french door design pressure
- impact rated french doors Texas
- french door threshold
- double door flush bolts
- french doors with sidelites
- french door weatherstripping coastal
- outswing french doors wind
- french door hardware replacement
- french doors cost Corpus Christi
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Corpus Christi services.
Materials, equipment and how we do french doors
The difference between french doors that lasts and french doors that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with positive and negative design pressure ratings per opening, AAMA/WDMA/CSA 101/I.S.2/A440 performance grade, tested size tables published in product evaluation reports, large-missile classification under ASTM E1996, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Corpus Christi job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of window work in the Coastal Bend means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do french doors outside Corpus Christi
Corpus Christi Window Replacement covers Corpus Christi and the surrounding communities of the Coastal Bend. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- French Doors in Portland, TX — San Patricio County, population 20,383 at the 2020 census
- French Doors in Kingsville, TX — Kleberg County, population 25,402 at the 2020 census
- French Doors in Robstown, TX — Nueces County, population 10,143 at the 2020 census
- French Doors in Rockport, TX — Aransas County, population 10,070 at the 2020 census
- French Doors in Ingleside, TX — San Patricio County, population 9,519 at the 2020 census
- French Doors in Aransas Pass, TX — San Patricio County, population 7,941 at the 2020 census
Start on the Corpus Christi Window Replacement homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Corpus Christi Chooses Corpus Christi Window Replacement
- ✓The rating on your quote comes from the tested size in the evaluation report, so you are told what the window you are buying does, not what the best unit in its family does.
- ✓We establish which of the county's three windstorm zones the address sits in before any product is priced, because the required load rises with the square of the design wind speed.
- ✓Glass is chosen opening by opening rather than ordered as one package, so a shaded north wall is not paying for the coating a west wall needs.
- ✓Where an opening outruns the tested size table, we change the shape or add a rated structural mullion instead of quietly quoting a unit that will not certify at that size.
The standards behind french doors
Quality here is not a matter of opinion — it is written down. The french doors work we do in Corpus Christi follows published industry standards: NFRC sets the U-factor and SHGC ratings on every window label, and ENERGY STAR defines the efficiency thresholds by climate zone. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every french doors project in Corpus Christi gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free french doors free estimate in Corpus Christi, or request a quote and we'll get right back to you.